Rimpact PRO/ORIGINAL MIX V1 Insert Set
Contents Per Pack:
1x Pro V1 Tyre Insert (for the rear)
1x Original V1 Tyre Insert (for the front)
2x 44mm, 55mm Rimpact Insert Compatible Valves or Peaty’s Valves (only available as a set)
4x Die Cut Rim Sticker
Pro V1 Specs:
50mm Wide
6mm Pro Layer
Compatible with 2.35” -2.6” Tyres
Compatible with 23mm – 35mm Rims
160g – 29” and 150g – 27.5”
Original V1 Specs:
50mm Wide
Compatible with 23mm – 35mm Rims
Compatible with 2.4”-2.6” Tyres
110g in 29” and 105g in 27.5”
This is a combination box aimed at offering protection in the rear of your bike and a lighter weight insert up front.
Rimpact Pro is our group test winning, 5 star reviewed insert. It utilises an innovative dual density design with a dense protection shell that helps dissipate extreme forces. It works in combination with our classic Original foam that cuts vibration and locks beads in place. Crafted from high-quality closed cell foam, the Rimpact Pro is engineered for maximum performance gain, allowing you to run lower pressures without the negative associated effects like rim damage, flats, and lack of support. Its unique design provides unbeatable impact absorption, reducing the risk of tyre damage and giving you the confidence to tackle any line with confidence.
The Original V1 is our light weight insert that when run upfront pairs really nicely with a Pro insert.
Cut out trail chatter, support your sidewalls, run less pressure, and protect your rims with the Rimpact Original V1 Tyre Insert. This insert is our lightweight trail, all mountain and light enduro insert. Great for shorter travel bikes, smoother riders or weight conscious pinners. Your mountain biking experience shouldn't be limited by punctures. That's why we've created the Rimpact Original V1 tyre insert – the weight conscious solution for protection and performance on the trail.
This insert is a cinch to install, and the weight is almost totally unnoticeable in the tyre making it a no brainer when it comes to ensuring your rides aren’t cut short by unwanted flat tyres.
Rimpact must be used in conjunction with an insert compatible valve design.
Use about 25% more sealant than recommended on the bottle to ensure the extra surface area of the insert is coated with plenty of fluid to spare. Our inserts are closed cell and cannot absorb liquid however some sealant will cling to the outside of the insert requiring a slightly higher dosage. It can be injected through Rimpact Valves but is best poured directly into the tyre.
Please follow installation instructions prior to fitting/removing. There is a QR scan code on the packaging that will link you to the installation page of this website.
Disclaimer: It is not advised to run air pressures outside that of the tyre manufacturers recommendations. Failure to do so may result in injury or the premature failure of the bicycle. Rimpact does not accept any responsibility for misuse of the Rimpact insert or improper installation.
Rimpact Inserts are designed to work WITH Rimpact Insert Compatible Valves.
Not included: Tyres, Wheelset.
Returns and Warranty Policy
https://rimpactmtb.com/warranty-terms-conditions/