Stans No Tubes Sealant and Tape - Tubeless Kit
New set of wheels or simply refreshing your set up? This kit combined with Rimpact Inserts and Valves are all you'll need to convert to tubeless.
Contents: 473ml bottle of Stans NoTubes Sealant, 10yrd roll of Stans Tubeless Tape.
Use about 25% more sealant than recommended on the bottle to ensure the extra surface area of the insert is coated with plenty of fluid to spare. Our inserts are closed cell and cannot absorb liquid however some sealant will cling to the imperfections on the outside of the insert requiring a slightly higher dosage.
Stan’s Tyre Sealant can repair up to a 1/4” hole instantly. One Pint (473ml) will convert approx 4 Mountain Bike tyres with Rimpact installed depending on individual usage, environment and tyre age. Riding in arid climates or storing the bike in a hot area will require most frequent monitoring of sealant levels. Special anti-freeze agents allow the sealant to be used in environment as cold as -30 F.
- First choice of riders around the world for tubeless conversion and flat prevention
- Seals punctures up to 1/4″ (6.5mm) quickly
- Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C)
- Natural materials, safe for the environment
- Can be injected through valve stems with removable cores compatible with tubes and tubular tyres
Stans Rim tape will create an air tight seal when properly applied to your rim. You should only need one layer but troublesome rims do exist. This 10 Yard roll of tape is enough to cover up to 4x 29" rims.